Sailing blocks
Blocks for sailing boats, from dinghies to cruisers: single, double and triple, fiddle, with becket, snatch, mast base, vertical and flush-mount blocks, plus deck orga...Read more
Filters
99 products
Sailing blocks
Blocks for sailing boats, from dinghies to cruisers: single, double and triple, fiddle, with becket, snatch, mast base, vertical and flush-mount blocks, plus deck organisers with 2 to 6 sheaves. Antal, Master and HS, with 19 to 90 mm sheaves on ball bearings or plain bearings, in composite or stainless steel.
Two of them are ours. Olli Flex is a modular block: with the Conversion Kit it goes from single to double to triple, it hangs from a shackle or sits flat on deck, and it has no metal bearings to seize with salt. 50 mm sheave for 12 mm line or 60 mm for 14 mm line. Olli Block is our one-piece anti-shock snatch block, with no side plates to break, in three sizes.
What size block do I need
Choose the sheave by line diameter: every product page gives the maximum line. In the HS range, for example:
| Line | HS sheave |
|---|---|
| up to 4 mm | 19 mm (Micro XS stainless) |
| 6 mm | 19-26 mm |
| 8 mm | 28 mm |
| 10 mm | 36 mm |
| 12 mm | 50 mm |
| 14 mm | 70 mm |
For the same line, a bigger sheave runs more freely and wears the line less.
What type of block
- Single, double, triple: one, two or three sheaves side by side. Together they make up mainsheet, vang and outhaul purchases.
- Fiddle: two sheaves in line, narrower than a double. The classic for mainsheet purchases.
- With becket: an extra eye for the standing end of the line, needed to close a purchase.
- Snatch: opens at the side to take the line without unreeving it. Handy for temporary leads, barber haulers and preventers.
- Mast base blocks and deck organisers: lead halyards and control lines from the mast back to the cockpit.
Ball bearing or plain bearing
Ball bearing sheaves run more freely and suit lines that run a lot under load, like sheets and purchases. Plain bearing sheaves are simpler and handle high static loads well. Either way, rinse with fresh water: sand and salt are what bearings hate most.
Where the line moves little or stays under static load, an Olli low friction ring is lighter and has no moving parts: read low friction ring or block. Rope clutches, cars, tracks and winch handles are in Sailing & mast hardware; to attach your blocks see boat shackles.
Frequently asked questions
What block do I need for 10 mm line?
One with a sheave designed for that diameter: in the HS range it is the 36 mm sheave. Every product page gives the maximum line. If you are between two sizes, go for the bigger one.
Ball bearing or plain bearing block?
Ball bearings for lines that run often under load, like sheets and purchases: they turn more freely. Plain bearings for high static loads: simpler and tougher.
What is a snatch block?
A block that opens at the side so you can drop the line in without unreeving it. Handy for temporary leads, barber haulers and preventers. Olli Block is ours, one piece with anti-shock protection.
Block or low friction ring?
A block pays off where the line runs often under load. A low friction ring is lighter and has no moving parts: use it where the line moves little or stays under static load, such as deflectors and secondary purchases.
What does block with becket mean?
It has an extra eye where you tie off the standing end of the line. You need it to build a purchase, such as the mainsheet or the vang.
Summer Sale · August 15 → 31
Summer Sale.
Summer Sale prices across the whole catalogue. Discount already applied, no code to enter. On September 1 everything goes back to list price, automatically.
Black MonthBlack WeekBlack FridayCyber Monday · November 1 → 22November 23 → 26November 27 → 29November 30
BlackBlackBlackCyber Month.Week.Friday.Monday.
Discount already applied, no code to enter. Black Month prices until November 22.Black Week prices until November 26.Black Friday prices until November 29.On December 1 everything goes back to list price, automatically.













































