Very easy to fit and closes the gap so that it would be difficult for the sheet to get stuck
Rope Deflector – skyddssystem för ventiler och klys
Rope Deflector – skyddssystem för ventiler och klys
Summer Sale-pris
--:--:--
Detta pris gäller till den 31 augusti. Den 1 september går det tillbaka till ordinarie pris.
Bara 863 kvar i lager
Pris Black MonthPris Black WeekPris Black FridayPris Cyber Monday
Slutar om --:--:--
-20%
Black Month-priser till 22 november.Black Week-priser till 26 november.Black Friday-priser till 29 november.Den 1 december går allt automatiskt tillbaka till ordinarie pris.
Bara 863 kvar i lager
Du hanterar inte punkten där skotet fastnar: du tar bort den
- Problemet, löst
- Inga borrhål, inga verktyg
- Ett paket, en däcksluckа
S 21,18 mm hög, 122,28 mm lång, för luckor med låg ram
M 39,75 mm hög, 117,44 mm lång, för stora luckor med hög ram
Hur många behöver du?
I lager
Beräknad leverans: mån 9 nov – ons 11 nov
Säker transaktion
Säljs av easysea®
Before you order
Hur monterar jag den?
Rengör ytan ordentligt, dra av skyddsfilmen från 3M-tejpen och tryck fast deflektorn i ventilhörnet. Ingen borrning, inga verktyg.Håller tejpen över tid?
Ja: 3M-tejpen är utvecklad för marina utomhusmiljöer och tål vatten, salt och UV. Rengör bara ytan ordentligt före montering.Vad ingår i ett paket?
2 matchande silikonhörn: det kompletta kitet för en ventil.-
3-year warranty
Full cover on material and manufacturing defects. No registration needed. With easysea +care you add 3 more years, 6 in total. -
30-day returns
If it is not right you send it back, even fitted. Full refund. -
Tracked shipping
Tracking on every order. Free shipping over €399 .
Rope Deflector – skyddssystem för ventiler och klys
REA-pris€15,20 EUR
Pris€19,00 EUR
Skotet fastnar aldrig mer
- 01
Problemet, löst
Under en manöver räknas varje sekund: en lina som fastnar under luckan betyder förlorad kontroll och risk för skador. Den paraboliska profilen låter den glida av.
- 02
Inga borrhål, inga verktyg
3M-tejp på baksidan: rengör ytan, dra av skyddet, tryck fast. Klart.
- 03
Ett paket, en däcksluckа
Två matchande, formade hörn i marinsilikon som täcker båda kanterna på en däcksluckа förut. Tål UV och salt i många år.
Från problem till total följsamhet
01
Slut på missöden
Inga fler skot som fastnar under luckhörnet vid slag och gippar.
02
Total följsamhet
Den paraboliska designen tar fysiskt bort punkten där linan fastnar: den glider över silikonytan utan att haka upp sig.
03
Formad för däcksluckor
Profilen följer luckans hörn: diskret, låg och i nivå med däck.
04
Under verklig last
Skotet tar last och löper: silikonet styr det utan att märka gelcoaten.
Tekniska specifikationer
| Gummimaterial | Silicone |
|---|---|
| Hårdhet | Shore 80A |
| Tålighet | UV-strålning och saltvatten |
| Storlek S (ROD-101) | 122,28 x 55,29 x 21,18 mm (L x B x H), 36 g per del, skiffergrå RAL 7015, 3M akrylskumtejp 1,1 mm |
| Storlek M (ROD-102) | 117,44 x 22 x 39,75 mm (L x B x H), 100 g per del, skiffergrå RAL 7015, 3M akrylskumtejp 1,1 mm |
| Delar per förpackning | 2 |
| Monteringstemperatur | 10-38 °C (idealiskt 20-38 °C) |
| SKU | S - ROD-101 | M - ROD-102 |
Designade av oss, testade till sjöss
- 3 års garantipå easysea-produkter
- 30 dagars öppet köpångrat dig? Inga problem
- Spårbar frakti hela Europa, Storbritannien och USA
- Nominerade till DAMEMETSTRADE:s pris för marin design
Customer Reviews
Overall rating: 4.4 / 5 from 50 reviews.
Scollata in punta
Ottimo prodotto, facile montaggio e perfetto per la sua funzione. Spedizione rapida e puntuale. Consigliato!
I have lewmar 30 and 60 hatches on my moody 336. Like many boats with these hatches, the deck slopes away from the hatch base and the non slip grp begins close to the hatch base. Two problems; 1.. the curve of the deflector is not compatible with the corner curve of this popular hatch and the slope means the deflector angles away from the hatch. 2.. the proximity of the non slip surface to the hatch means that the 3m vhb tape is unlikely to grip. For me this has been a waste of money . Also a significant delivery charge and some delivery delays and communication problems.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Hi, we’re sorry the Rope Deflector wasn’t suitable for your setup. The product images on our website show a Lewmar Low Profile 44; in your case, the main issue seems to be the limited smooth surface available for the adhesive. Our customer care replies within 24 hours, while shipping costs are set by the couriers and we already cover part of them for non-EU deliveries. We’re launching a larger version and would be happy to send you one free of charge.
Hi, Problem solved ! Before we used to put an elastic around our hatch always afraid to forget to put it on. Stress gone ! Thx for the good tip ! We will be sure to spread the word :-) Michel S/Y TEQUILA
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Thank you Michel! So happy to hear the Rope Deflector solved the problem and took the stress away. Enjoy sailing on S/Y TEQUILA! ⛵️
Easy to install and efficient It could be white instead of black
Muy práctico
alles bestens
Molto seria
Ich habe noch keine Langzeiterfahrung, tut mir leid. Ich hofe dass der Kleber hält. Das ist ein rauhes Umfeld das Vordeck.
Parfait
Vor einer Woche installiert. Bis jetzt scheint es zu funktionieren.
Parfait. A voir si le scotch tient dans le temps.
il ne colle pas sur le teck.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Bonjour, et merci pour votre retour. C'est exact : le Rope Deflector se colle uniquement sur une surface lisse et plane en gelcoat, car l'adhésif 3M a besoin d'un contact continu que le grain du teck ne permet pas. C'est précisé sur la fiche produit. Si vous ne l'avez pas encore posé et que la livraison date de moins de 30 jours, le retour est gratuit : écrivez-nous à support@easysea.org. Anna // customer care
Great idea, always wondered why they designed the hatches to always catch the sheets. Now this is not an issue any more.
Worked well.
We’re actually waiting for the weather to warm up for us to install it so I had to score 4 out of five hoping it’s gonna work really well! We feel it’s a little bit too chilly right now. Is there an actual temperature that it’s appropriate to put on?
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Yes, temperature does make a difference during installation. For 3M double-sided tapes, including VHB, the ideal application temperature is between 20°C and 38°C. We would recommend avoiding installation below around 10–15°C, as the adhesive can become too stiff to bond properly to the surface. After application, it’s best to allow around 72 hours for the adhesive to reach its full bond strength. Once fully bonded, the tape can withstand a much wider temperature range, approximately from -40°C to +70°C.
ok
product is ok, but the corners on my hatch have a much larger radius than the protectors, so I needed to bend the protectors further open. Despite cleaning the gelcoat with acetone and leaving 24 hours after sticking down, the glue has not stuck well. It's an expensive product to be semi-successful.
The angle on the moon is something less than 90 degrees so that when the points touch the hatch there is a gap between the center of the moon wedge and the hatch; however it works as advertised if not perfectly matched to the rounding of the hatch.
The Rope Deflectors worked great! Just sailed about 650 NM, and the jib sheets no longer snagged in the forward hatches of my sailboat. Well worth the money spent!
Really happy with the product and the delivery!
Works!
Works exactly as advertised. We used one each on the outboard corners of a opening cabin port light to deflect inhauler lines running across the cabin top.
Shipping was fast! The "lip" surface around my hatch is smaller and a different shape than the rope deflectors. So I had to "form" the deflectors to fit. Otherwise installation was straight forward and easy. Time will tell if they stay attached to the fiberglass because of the side force from my shaping them to fit. I have no doubt that they will prevent the sheets from jamming under the hatch cover.
Nice idea to solve a pain in the neck
Dispatched quickly but UPS then slowed down and "delivery by Friday " became the following Monday. I like the concept of the protectors, however we have a small hatch causing problems which needs a smaller radius. Also our deck doesn't have enough flat area for a proper fit adjacent to the hatch. I assume it works well with many vessels, but sadly not ours.
Seems like it will be a useful product. The curve of the deflectors doesn't match the corners of our hatches, but it fits well enough.
These work very well. We have used them to deflect trims on the forward hatch of two sailboats.
Rope Deflector – Porthole Fairlead Protection System
Store owner replied: Thank you. Great to hear they worked well on both boats and helped with the forward hatch setup. ⛵️
Required clearance around hinge side of hatch was more than I expected.
Remplis bien sa mission
…….
Easy to install and received the deflectors very quickly
Very easy. Order, ship, customs, arrival. Works great.
By far the most common hatch is the Lewmar Ocean Series. The rope deflector was designed around a hatch with a much larger corner radius. The deck on our boat was designed with only a small section of smooth surface around the hatch so the deflector did not fit well. I bent the deflector to match the radius of the hatch and to adhered it to the deck. It had to be bent quite a bit and I am concerned about long term ability of the adhesive to hold it into the distorted shape. Otherwise it looks like a great design. Perhaps providing more information on your site about the radius of the presenter and what is allowable bending to fit. Also offering an addition version with a smaller radius for ports and other hatch designs would be helpful.
For years I tried to solve the problem of the sheets getting stucked around tthe portholes ! I have tried several different solutions , but nothing has shown as efficient as yours
This rope deflectors is amazing, it solves issues what a great inventive and simple item thanks a lot
Seem to work so far.
works great.
costo eccessivo
Frågor innan du beställer
Hur monterar jag den?
Rengör ytan ordentligt, dra av skyddsfilmen från 3M-tejpen och tryck fast deflektorn på luckans hörn. Inga borrhål, inga verktyg.
Vilken storlek behöver jag?
S är originalet: 21,18 mm hög och 122,28 mm lång, för hörn på ventiler och däckluckor med låg karm. M är större: 39,75 mm hög och 117,44 mm lång, för stora luckor med högre karm. Mät hur högt karmen sticker upp över däck: över 21 mm, välj M.
Vid vilken temperatur ska den monteras?
3M VHB-tejp fungerar bäst mellan 20 och 38 °C. Rekommenderat minimum: 10-15 °C. Under 10 °C blir limmet för styvt, väter inte ytan ordentligt och vidhäftningen försämras. Undvik även montering över 38 °C.
Håller limmet över tid?
Ja: 3M-tejpen är gjord för marin utomhusmiljö och tål vatten, salt och UV. Rengör bara ytan ordentligt före montering.
Vad ingår i ett paket?
2 matchande silikonhörn: komplett kit för en däcksluckа.
När skickas den?
Den finns i lager: order behandlas och skickas inom 2 arbetsdagar.
Vilken garanti gäller?
3 års garanti mot fabrikationsfel, plus 30 dagars öppet köp med pengarna tillbaka.
Komplettera din utrustning
Köps tillsammans
Rope Deflector – skyddssystem f...
€15,20
DENNA ARTIKEL
Summer Sale · 15 → 31 augusti
Summer Sale.
Summer Sale-priser i hela katalogen. Rabatten är redan tillämpad, ingen kod att ange. Den 1 september går allt automatiskt tillbaka till ordinarie pris.
--
Dagar
--
Tim
--
Min
--
Sek
Black MonthBlack WeekBlack FridayCyber Monday · 1 → 22 november23 → 26 november27 → 29 november30 november
BlackBlackBlackCyber Month.Week.Friday.Monday.
Rabatten är redan tillämpad, ingen kod att ange. Black Month-priser till 22 november.Black Week-priser till 26 november.Black Friday-priser till 29 november.Den 1 december går allt automatiskt tillbaka till ordinarie pris.
--
Dagar
--
Tim
--
Min
--
Sek